Lighting practice

Flos Lighting for Offices: An Admin Buyer's FAQ on the Chiara, the String Light Cone, and What an LED Driver Actually Does

Before the questions: who's answering

I'm the office administrator at a 180-person company. I handle facilities and FF&E ordering — roughly $1.4M a year across 30-some vendors — and lighting lands on my desk more than you'd probably expect. Conference rooms, a client lounge, two trade show booths a year, and a lobby banner nobody planned for until it appeared in a marketing deck.

I'm not a lighting designer. I can't run photometric calculations and I don't pretend to. What I can do is tell you which questions separate a lighting quote that holds up from one that costs you again in year three.

(Everything below is from the buyer's side of the table. Adjust it for your own building — nothing here is universal.)

1. Can you justify a Flos Chiara floor lamp for an office?

In a room where clients sit, sometimes yes. In a back-office corner, almost never — and I'd rather say that out loud than pretend every space deserves a design piece.

The argument for the Flos Chiara floor lamp isn't aesthetics, or not only. It's a Mario Bellini design that's been in production since 1969: a rolled-steel shade on a form that doesn't look dated in photos from any decade. A dealer quote in January 2025 came back at four figures per unit, which I'm not going to dress up as easy to defend to finance.

Here's the part I got wrong early. Everything I'd read about office furniture said the same thing — buy the cheaper lookalike, put the savings into something people actually touch. In practice, the two lookalikes we bought in 2022 for a reception area went back inside a year. Wobble, a finish that scuffed, and a shade that threw light straight into people's eyes at seated height. The refund didn't cover the repacking, the freight, or the three weeks reception looked half-finished while we sorted it out.

My rule now: buy the real piece where it's visible and long-lived, and buy honest commodity fixtures everywhere else. Don't buy a copy and hope.

2. Flos String Light Cone — indoor or outdoor?

Depends on the SKU, and that's the whole answer. The String Lights family — Michael Anastassiades' thin-cable pieces — is sold in indoor and outdoor versions, in more than one size and cable length. The photo on a vendor page will not tell you which one you're buying.

What I ask before ordering: the exact model number, the IP rating on that model, the cable length as shipped, and what the ceiling anchor needs. That last one has bitten us. A pendant that requires a specific canopy or a structural anchor turns a clean fixture quote into a fixture quote plus a lift rental plus a second electrician visit.

And check the dimming spec against whatever dimmer the space already has. I've been burned assuming a fixture would play nice with a wall dimmer we installed in 2019 (it didn't). Send the dimmer model number with the RFQ and have the dealer confirm in writing. Do it before the PO, not after.

3. What does a driver do for LED lights?

Short version: it converts the AC coming out of the wall into the low-voltage DC an LED actually runs on, and it regulates current so the diode doesn't cook itself. No driver, no light — or a very brief, very bright one.

Why a buyer should care comes down to three things:

  • Where it lives. Integrated into the fixture, or remote in a ceiling void? If it's remote and there's no access panel, a $60 part becomes ceiling surgery.
  • Whether it's replaceable. Ask for the driver's part number and whether the dealer stocks it. A sealed driver means the whole fixture gets replaced when it fails.
  • What it dims with. 0-10V, DALI, phase-cut — these aren't interchangeable, and drivers can differ even within one product family.

The failure that changed how I write specs: 14 recessed fixtures in a conference room, sealed drivers, installed in 2021. Two died in year three. Replacing them meant matching a discontinued integrated module, and we paid for a service visit twice because the first part number was wrong. That's the total cost of ownership nobody puts in the spreadsheet — the unit price was fine. The ownership wasn't.

4. How do I spec a spotlight for a banner without overpaying?

A spotlight banner setup is a narrow-beam job. For a banner 2.5–3m from the fixture, I've had the best results with 15–24 degree beams, CRI 90 or above, and a color temperature that matches the brand's own photography — usually 3000K indoors, 3500K if the space is already cool-white.

On the “yellow spotlight” question, be specific about what you actually mean. If you want warm and slightly amber, that's a 2700K fixture with a decent CRI. If you want colored light, that's a different product — a colored LED or a gel — and it changes how the banner's colors read. We lit a blue banner with an amber spot for one trade show and the brand blue photographed green. Marketing noticed before I did.

The other thing: avoid hotspots. One tight beam on a 2m banner gives you a bright circle and two dark ends. Two or three wider fixtures at lower output cost more up front and photograph better, which is the only reason the banner exists.

5. Why do two quotes for the same lamp differ by 40%?

Because they're not the same quote.

Until 2023 we didn't have a formal bid template. It cost us when a “cheaper” quote turned out to exclude crating, include a different driver, and price the dimmer separately. We also compared a 6-week lead time against a 12-week one without noticing, on a project with a hard opening date.

What's actually inside the number, nearly always: freight and crating, the driver (integrated versus remote changes the price), the dimmer, installation plus any lift or scaffold, spare parts, warranty length and who honors it, and lead time. Two quotes can match on the spec sheet and sit thousands apart once those lines are on the table.

I now send a one-page sheet with every RFQ: model numbers, dimming protocol, ceiling type, install responsibility, and required on-site date. Not glamorous. It cut our re-quote rate more than any negotiation tactic I've tried.

6. What happens when the fixture gets discontinued?

Nobody asks this and everybody should. Design lighting lines stay in production for decades — the Chiara has been going since 1969 — but finishes and driver modules get retired quietly. Three questions for the dealer: is this finish current, is the driver module stocked, and will you sell me a spare now?

Buying one spare driver per 10 fixtures has cost us a few hundred dollars total and saved two conference rooms.

7. What I still don't understand

Honestly, I'm not sure why driver lead times swing so wildly between otherwise comparable products. Same spec, same wattage, and one ships in two weeks while the other is quoted at twelve with a shrug. My best guess is inventory strategy at the manufacturer level, but I've never gotten a straight answer.

If you're deeper into lighting spec than I am — actual lighting designers, I'm looking at you — that's the one I'd like explained.

Linh Tran

Linh Tran

Linh Tran is an LED driver and smart-lighting controls analyst specializing in dimming, sensors, switches, wireless control, and connected lighting systems. She checks IEC 61347 controlgear safety boundaries and IEC 62386 protocol functions, then measures power factor, THD, inrush current, standby load, dimming range, addressability, and diagnostic behavior. She writes engineering guides for teams comparing drivers, motion sensors, smart bulbs, and control strategies across new installations and interoperability-sensitive retrofits.